Power Clean — industrial cleaning chemicals by Roovel Solutions
Rows of machined steel bearing races after degreasing

Pick by the Parameters

SELECTION MATRIX

Every product on one spec sheet — metal compatibility, process window, application methods and corrosion protection, side by side.

All 41 Power Clean products compared on the parameters that actually decide the choice: which metals each grade is safe on, the operating temperature and dilution it runs at, its chemistry and foam behaviour, the wash equipment it suits, and how long it protects parts from rust afterwards. Work left to right — metal first, because that is the one that damages parts when it is wrong.

THE MATRIX

Every Product, Every Parameter

Scroll the table sideways to reach the process window and application columns; on a phone it becomes a pane you pan around.

ProductMetal compatibility*Process windowApplicationProtection
Name · SKUFerrous & steelAluminiumCopper & brassPlastics & binsOperating tempDilutionChemistryFoamSpray / jetImmersion / soakUltrasonicManual / wipeRust protection
Water-Based Cleaners & Degreasers
XL#100✓ Ferrous & steel✓ Aluminium✓ Copper & brass✓ Plastics & bins60–70 °C1–15%AlkalineLow✓ Spray / jet✓ Immersion / soak✓ Ultrasonic✓ Manual / wipeDays
XL+ (Plus)#111✓ Ferrous & steel——Alkaline—✓ Spray / jet✓ Immersion / soak✓ Ultrasonic—
XL-77 / SP#804✓ Ferrous & steel✓ Aluminium✓ Copper & brass40–50 °C3–15%Mild AlkalineLow✓ Spray / jet✓ Immersion / soak✓ UltrasonicDays–weeks
XL-16#116✓ Ferrous & steel—On TDSAlkalineLow (to 8 bar)✓ Spray / jet✓ Ultrasonic—
XL-32#144✓ Ferrous & steel——AlkalineLow✓ Spray / jet—
NF-14#714✓ Aluminium✓ Copper & brass40–55 °C3–15%NeutralLow✓ Spray / jet✓ Immersion / soak✓ Ultrasonic✓ Manual / wipeNo white rust
NF-12#712✓ Aluminium✓ Copper & brass——NeutralLow✓ Spray / jetNo white rust
LF#800✓ Ferrous & steel✓ Aluminium40–70 °C1–15%Mild AlkalineNone✓ Spray / jetDays
LF-45#845✓ Ferrous & steel✓ Aluminium45–50 °C~2%Mild AlkalineNone✓ Spray / jetDays
LF-43#848✓ Ferrous & steel——High AlkalineNone✓ Spray / jet—
LF-59#843✓ Ferrous & steel✓ Aluminium✓ Copper & brassAmbient–65 °C2–10%Mild AlkalineNone✓ Spray / jet✓ Immersion / soak✓ UltrasonicWhite-rust inhibited
DE-33#910✓ Copper & brass——Acidic—✓ Immersion / soak✓ Manual / wipe—
DE-34#911✓ Copper & brass——Acidic—✓ Spray / jet✓ Immersion / soak✓ Ultrasonic✓ Manual / wipe—
CU-20#923✓ Copper & brass——Additive—✓ Immersion / soakPassivation seal
ALB#117✓ Aluminium25–40 °C5–9% US · 10–15% soakAcidic—✓ Immersion / soak✓ Ultrasonic✓ Manual / wipe—
ALB-54#663✓ AluminiumAmbientLow conc.Acidic—✓ Manual / wipe—
SS✓ Ferrous & steelAmbient1:20Mild Alkaline—✓ Manual / wipePreserves finish
DE-37#912——Acidic—✓ Manual / wipe—
HD#122✓ Ferrous & steel—5–15%High Alkaline—✓ Spray / jet✓ Ultrasonic—
FC-235#235Ambient3–15%Alkaline—✓ Manual / wipe—
CR21#502✓ Ferrous & steel62–70 °C5–25%Alkaline—✓ Spray / jet✓ Ultrasonic—
GC#243Ambient1:10Neutral—✓ Manual / wipe—
MP-26#156✓ Ferrous & steel✓ Aluminium——Mild Alkaline—✓ Manual / wipe—
BW-77#177✓ Plastics & bins50–65 °C1:20 (to 1%)Alkaline—✓ Spray / jet✓ Immersion / soak—
BW-30#132✓ Plastics & bins——Alkaline—✓ Immersion / soak✓ Manual / wipe—
AR#128✓ Ferrous & steel✓ Aluminium62–70 °C1:10Alkaline—✓ Spray / jet✓ Ultrasonic✓ Manual / wipe—
CO#137✓ Aluminium✓ Copper & brass—1:2 – 1:10AlkalineFoaming✓ Spray / jet✓ Manual / wipe—
D131#200——Additive——
SIP#662✓ Ferrous & steel——Acidic—✓ Immersion / soak✓ Manual / wipePhosphate layer
HI32✓ Ferrous & steel——Additive—✓ Immersion / soakInhibits acid attack
Cooling Tower Chemicals
DE-46#503✓ Ferrous & steel✓ Copper & brass——Acidic—✓ Immersion / soakInhibitor built in
SA-17#915✓ Ferrous & steel✓ Copper & brass—Low dosageAdditive—✓ Immersion / soak—
Solvent Cleaners & Degreasers
PC-S 312#312✓ Ferrous & steel✓ Aluminium✓ Copper & brassAmbientUse as-isSolvent—✓ Spray / jet✓ Immersion / soak✓ Manual / wipe—
PC-S 342#342✓ Ferrous & steel✓ Aluminium✓ Copper & brassAmbientUse as-isSolvent—✓ Immersion / soak✓ Manual / wipe—
CD-9#152✓ Ferrous & steel✓ AluminiumAmbient—Solvent—✓ Ultrasonic✓ Manual / wipe—
CD-10#163✓ Ferrous & steel✓ AluminiumAmbient—Solvent—✓ Manual / wipe—
Rust Protection & Removal
PC Rust Preventive 14#614✓ Ferrous & steel—3–5% DM waterAdditive—✓ Immersion / soakHours
PC Rust Preventive 16#616✓ Ferrous & steel—Diluted, DM waterAdditive—✓ Immersion / soakHours–days
PC Rust Preventive 35#404✓ Ferrous & steel—ConcentratedAdditive—✓ Immersion / soakDays
PC Rust Preventive Oil 636#636✓ Ferrous & steelAmbientUse as-isOil—✓ Immersion / soak3–6 months
PC Rust Remover 27#627✓ Ferrous & steel—1:3 light · 1:2 heavyAcidic—✓ Spray / jet✓ Immersion / soak✓ Ultrasonic—

* Typical values at recommended dilution — confirm against the product TDS/SDS for your parts and process. Some products are safe on further substrates at lower concentrations and temperatures.

For cast iron, ductile or sintered parts, test before use. “—” = figure supplied on request with the technical data sheet.

Cleaning Duty Spectrum — Light to Heavy

Light duty · hydrocarbon soilsMedium dutyHeavy duty · hydrocarbon soils
GC · SS
NF-14 · NF-12
LF-45 · ALB
LF · LF-59
XL · XL+
SP · BW-77
HD · LF-43
CR21 · AR
READING IT

How to Use the Matrix

  1. 1Rule out by metal firstFerrous, aluminium, copper and brass, or plastics and bins. A grade that is not ticked for your metal is not a candidate, whatever else it does well.
  2. 2Match the applicationSpray/jet, immersion/soak, ultrasonic or manual wipe. This is where foam matters — spray washers and ultrasonic baths only take low-foam grades.
  3. 3Check the process windowOperating temperature and dilution against what your line can actually hold. A bath that never reaches its window will underperform and, on low-foam grades, will foam.
  4. 4Finish on protectionHow long parts stay rust-free after the wash. Days is enough between operations; stock and transit need a dedicated rust preventive.

Want us to pick for you?

Send the metal, the soil and the wash equipment and we will name the grade, the dilution and the temperature.

QUESTIONS

Using the Matrix — FAQ

How do I read the selection matrix?

Start with the metal column — ferrous, aluminium, copper and brass, or plastics and bins — and rule out anything not ticked. Then check the application columns against your equipment, and finally the process window for the temperature and dilution your line can actually run.

Which column matters most?

Metal compatibility, because getting it wrong damages parts rather than just cleaning them poorly. Alkaline grades etch aluminium and zinc, so a mixed-metal basket sets the ceiling for the whole bath.

What does a dash mean in the process window?

That the figure is supplied on request with the technical data sheet rather than published here. Ask us and we will send the sheet with the product name prefilled.

Can one product cover several wash processes?

Often yes — many grades work across spray, soak and ultrasonic at different dilutions. The application columns show which methods each product is validated for; the foam column is what usually decides whether it can move between them.

Rows of stainless process vessels and pipework in the production hall
STILL NARROWING IT DOWN?

Send Us the Part

The matrix gets you to a shortlist. A sample component and a description of your soil gets you to the answer.

Prefer to talk? Call +91-9731727868WhatsApp us